| MOQ: | 10 sets |
| Price: | USD 185-240 per set FOB Qingdao |
| Standard Packaging: | Half shells nested, 8 sets per pallet, strapped and stretch wrapped |
| Delivery Period: | 15-20 working days |
| Payment Method: | T/T 30% deposit, 70% before shipment |
| Supply Capacity: | 3000 sets per month |
This 800 mm pipe float is the heavy end of our polyethylene float range, designed for offshore pipeline laying and large diameter dredge lines where a single collar has to carry close to a tonne of submerged pipe. It is a foam filled, rotomoulded LLDPE unit built around a 20 kN impact rating, so it tolerates the handling that comes with offshore spreads: crane slings, barge deck contact, rough swell against a stinger and the occasional dropped shackle. We build these for pipeline contractors working the US Gulf of Mexico, West Africa and Southeast Asian crossing projects, and the drawing set follows the same bolted half shell logic that has kept our collars in service on Indonesian dredge lines for over a decade.
Key Features| Parameter | Specification |
|---|---|
| Model | JB-PF800 |
| Shell material | UV stabilized virgin LLDPE, rotomoulded |
| Core material | Rigid closed cell PU foam, 45 kg/m³ |
| Inner bore (pipe capacity) | 800 mm / DN800 |
| Outer diameter x length | 1200 mm x 1200 mm |
| Net buoyancy per unit | 900 kg |
| Impact resistance | 20 kN compression without shell cracking |
| Working temperature | -60°C to 80°C |
| Fasteners | 316L stainless steel, 4 bolts per side |
| Color options | Safety orange, yellow, black, custom RAL or Pantone |
| Design service life | 15 to 20 years |
Offshore and nearshore pipeline installation is the main use: 800 mm discharge and outfall lines, large dredge suction lines, floating slurry pipelines and temporary crossing lines. In the United States the typical buyer is a marine contractor working outfall diffuser projects, beach renourishment, or inland river dredging where the line has to be re-floated and moved every few days. In Indonesia and Southeast Asia the same float goes onto 800 mm HDPE dredge discharge lines for reclamation and port expansion, where high sediment load and strong tidal current put a premium on buoyancy reserve rather than on light weight.
Because buoyancy is chosen per metre of pipe, we publish the submerged weight assumption behind each rating. If your product is steel rather than HDPE, or if the line carries slurry at a higher specific gravity, send the pipe OD, wall thickness and slurry SG and we will confirm the collar spacing in writing.
Testing, Documentation and ComplianceEach batch is documented with shell wall thickness measurements, foam density results, buoyancy verification and a dimensional report. One unit per 50 is hydrostatically loaded to 1.5 times rated buoyancy for 24 hours. Factory acceptance testing with a third party inspector such as SGS, BV or Intertek is available, and we can supply a mill certificate for the PE resin on request. Our quality system has been ISO 9001 certified since 2009 and our marine products carry CCS recognition. Where a project specifies ABS or DNV review, we provide the drawings and material data needed for the submission rather than claiming a classification we do not hold.
Packaging, Delivery and WarrantyHalf shells nest on pallets, eight collars per pallet at roughly 2.4 cubic metres, strapped and stretch wrapped. A 40 foot container takes 16 pallets. Bolts and washers are bagged per collar and labelled. Standard lead time is 15 to 20 working days for orders up to 500 sets, and we keep mould capacity for 3000 sets per month. Shipping is normally FOB Qingdao, with CIF Los Angeles, Houston or Jakarta quotations available. Warranty is 24 months against defects in material and workmanship. Every claim we have received since 2015 has been answered within two working days, and where the fault was ours, the replacement was shipped on our cost.
| MOQ: | 10 sets |
| Price: | USD 185-240 per set FOB Qingdao |
| Standard Packaging: | Half shells nested, 8 sets per pallet, strapped and stretch wrapped |
| Delivery Period: | 15-20 working days |
| Payment Method: | T/T 30% deposit, 70% before shipment |
| Supply Capacity: | 3000 sets per month |
This 800 mm pipe float is the heavy end of our polyethylene float range, designed for offshore pipeline laying and large diameter dredge lines where a single collar has to carry close to a tonne of submerged pipe. It is a foam filled, rotomoulded LLDPE unit built around a 20 kN impact rating, so it tolerates the handling that comes with offshore spreads: crane slings, barge deck contact, rough swell against a stinger and the occasional dropped shackle. We build these for pipeline contractors working the US Gulf of Mexico, West Africa and Southeast Asian crossing projects, and the drawing set follows the same bolted half shell logic that has kept our collars in service on Indonesian dredge lines for over a decade.
Key Features| Parameter | Specification |
|---|---|
| Model | JB-PF800 |
| Shell material | UV stabilized virgin LLDPE, rotomoulded |
| Core material | Rigid closed cell PU foam, 45 kg/m³ |
| Inner bore (pipe capacity) | 800 mm / DN800 |
| Outer diameter x length | 1200 mm x 1200 mm |
| Net buoyancy per unit | 900 kg |
| Impact resistance | 20 kN compression without shell cracking |
| Working temperature | -60°C to 80°C |
| Fasteners | 316L stainless steel, 4 bolts per side |
| Color options | Safety orange, yellow, black, custom RAL or Pantone |
| Design service life | 15 to 20 years |
Offshore and nearshore pipeline installation is the main use: 800 mm discharge and outfall lines, large dredge suction lines, floating slurry pipelines and temporary crossing lines. In the United States the typical buyer is a marine contractor working outfall diffuser projects, beach renourishment, or inland river dredging where the line has to be re-floated and moved every few days. In Indonesia and Southeast Asia the same float goes onto 800 mm HDPE dredge discharge lines for reclamation and port expansion, where high sediment load and strong tidal current put a premium on buoyancy reserve rather than on light weight.
Because buoyancy is chosen per metre of pipe, we publish the submerged weight assumption behind each rating. If your product is steel rather than HDPE, or if the line carries slurry at a higher specific gravity, send the pipe OD, wall thickness and slurry SG and we will confirm the collar spacing in writing.
Testing, Documentation and ComplianceEach batch is documented with shell wall thickness measurements, foam density results, buoyancy verification and a dimensional report. One unit per 50 is hydrostatically loaded to 1.5 times rated buoyancy for 24 hours. Factory acceptance testing with a third party inspector such as SGS, BV or Intertek is available, and we can supply a mill certificate for the PE resin on request. Our quality system has been ISO 9001 certified since 2009 and our marine products carry CCS recognition. Where a project specifies ABS or DNV review, we provide the drawings and material data needed for the submission rather than claiming a classification we do not hold.
Packaging, Delivery and WarrantyHalf shells nest on pallets, eight collars per pallet at roughly 2.4 cubic metres, strapped and stretch wrapped. A 40 foot container takes 16 pallets. Bolts and washers are bagged per collar and labelled. Standard lead time is 15 to 20 working days for orders up to 500 sets, and we keep mould capacity for 3000 sets per month. Shipping is normally FOB Qingdao, with CIF Los Angeles, Houston or Jakarta quotations available. Warranty is 24 months against defects in material and workmanship. Every claim we have received since 2015 has been answered within two working days, and where the fault was ours, the replacement was shipped on our cost.