| MOQ: | 20 sets |
| Price: | USD 68-95 per set FOB Qingdao |
| Standard Packaging: | Half shells nested, 20 sets per pallet, strapped and stretch wrapped |
| Delivery Period: | 15-20 working days |
| Payment Method: | T/T 30% deposit, 70% before shipment |
| Supply Capacity: | 3000 sets per month |
These UV stabilized HDPE pipe floats buoys are built for one job: keeping a 500 mm dredge line afloat in hot, aggressive seawater. We have supplied polyethylene float collars to dredging contractors in Indonesia, Vietnam and the Gulf of Mexico since 2008, and this JB-PF500 model is the specification that survived our customers hardest job sites. The shell is rotomoulded in one piece from virgin LLDPE with 2.5 percent carbon black and a hindered amine light stabilizer package, then filled with closed cell rigid polyurethane foam at 40 kg per cubic metre. No seam, no welded joint, no hollow air chamber that can be punctured by a piling or a barge fender.
Key Features| Parameter | Specification |
|---|---|
| Model | JB-PF500 |
| Shell material | Virgin LLDPE, UV stabilized, rotomoulded one piece |
| Core material | Rigid closed cell polyurethane foam, 40 kg/m³ |
| Inner bore (pipe capacity) | 500 mm / DN500 |
| Outer diameter x length | 800 mm x 800 mm |
| Net buoyancy per unit | 350 kg |
| Impact resistance | 20 kN compression, deformation < 5 percent |
| Working temperature | -60°C to 80°C |
| Fasteners | 316L stainless steel bolts, 2 per side |
| Standard colors | Safety orange, yellow, black, custom RAL on request |
| Design service life | 15 years outdoor |
Pipeline laying and dredging contractors use this collar on 500 mm HDPE discharge lines, suction lines and slurry pipelines. Typical installations are cutter suction dredgers working reclamation projects, sand and gravel dredges, desilting of harbour basins, and tailings or slurry lines crossing open water. In Indonesian projects the floats are usually specified in orange so the line stays visible against brown turbid water and is easy to spot from the dredge cabin during night shifts. For US Gulf Coast and inland river work, the same float is often ordered in black or yellow to match existing spreads and to keep a low visual profile near residential waterfronts.
Because the two half shells clamp around the pipe rather than sliding over the end, collars can be added to a line that is already in the water, which is the usual emergency request we get when a spread is under ballasted and the pipe starts sinking mid project.
Quality Control and What We TestEvery production batch is checked for wall thickness at four points, foam density on a destructive sample, bore roundness and bolt hole alignment. We hydrostatic test one collar per 50 pieces at 1.5 times rated buoyancy for 24 hours and record the result. Third party inspection through SGS or BV can be arranged at our factory before shipment, and the material batch, foam density and test record travel with the packing list so your site engineer can match the certificate to the pallet. Our workshop has been ISO 9001 certified since 2009, and we hold CCS recognition for marine grade products.
Packaging and WarrantyHalf shells nest to save container space: 20 collars per pallet, roughly 1.6 cubic metres per pallet, 12 pallets in a 20 foot container. Each pallet is strapped, wrapped in stretch film and corner protected, and hardware is packed in a labelled bag per collar so nothing goes missing on site. We ship FOB Qingdao normally, and CIF or DDP terms are available for Indonesian and US ports. Warranty is 24 months against manufacturing defects in material and workmanship, supported by a replacement policy that we have honoured on fewer than 0.3 percent of units shipped since 2015.
| MOQ: | 20 sets |
| Price: | USD 68-95 per set FOB Qingdao |
| Standard Packaging: | Half shells nested, 20 sets per pallet, strapped and stretch wrapped |
| Delivery Period: | 15-20 working days |
| Payment Method: | T/T 30% deposit, 70% before shipment |
| Supply Capacity: | 3000 sets per month |
These UV stabilized HDPE pipe floats buoys are built for one job: keeping a 500 mm dredge line afloat in hot, aggressive seawater. We have supplied polyethylene float collars to dredging contractors in Indonesia, Vietnam and the Gulf of Mexico since 2008, and this JB-PF500 model is the specification that survived our customers hardest job sites. The shell is rotomoulded in one piece from virgin LLDPE with 2.5 percent carbon black and a hindered amine light stabilizer package, then filled with closed cell rigid polyurethane foam at 40 kg per cubic metre. No seam, no welded joint, no hollow air chamber that can be punctured by a piling or a barge fender.
Key Features| Parameter | Specification |
|---|---|
| Model | JB-PF500 |
| Shell material | Virgin LLDPE, UV stabilized, rotomoulded one piece |
| Core material | Rigid closed cell polyurethane foam, 40 kg/m³ |
| Inner bore (pipe capacity) | 500 mm / DN500 |
| Outer diameter x length | 800 mm x 800 mm |
| Net buoyancy per unit | 350 kg |
| Impact resistance | 20 kN compression, deformation < 5 percent |
| Working temperature | -60°C to 80°C |
| Fasteners | 316L stainless steel bolts, 2 per side |
| Standard colors | Safety orange, yellow, black, custom RAL on request |
| Design service life | 15 years outdoor |
Pipeline laying and dredging contractors use this collar on 500 mm HDPE discharge lines, suction lines and slurry pipelines. Typical installations are cutter suction dredgers working reclamation projects, sand and gravel dredges, desilting of harbour basins, and tailings or slurry lines crossing open water. In Indonesian projects the floats are usually specified in orange so the line stays visible against brown turbid water and is easy to spot from the dredge cabin during night shifts. For US Gulf Coast and inland river work, the same float is often ordered in black or yellow to match existing spreads and to keep a low visual profile near residential waterfronts.
Because the two half shells clamp around the pipe rather than sliding over the end, collars can be added to a line that is already in the water, which is the usual emergency request we get when a spread is under ballasted and the pipe starts sinking mid project.
Quality Control and What We TestEvery production batch is checked for wall thickness at four points, foam density on a destructive sample, bore roundness and bolt hole alignment. We hydrostatic test one collar per 50 pieces at 1.5 times rated buoyancy for 24 hours and record the result. Third party inspection through SGS or BV can be arranged at our factory before shipment, and the material batch, foam density and test record travel with the packing list so your site engineer can match the certificate to the pallet. Our workshop has been ISO 9001 certified since 2009, and we hold CCS recognition for marine grade products.
Packaging and WarrantyHalf shells nest to save container space: 20 collars per pallet, roughly 1.6 cubic metres per pallet, 12 pallets in a 20 foot container. Each pallet is strapped, wrapped in stretch film and corner protected, and hardware is packed in a labelled bag per collar so nothing goes missing on site. We ship FOB Qingdao normally, and CIF or DDP terms are available for Indonesian and US ports. Warranty is 24 months against manufacturing defects in material and workmanship, supported by a replacement policy that we have honoured on fewer than 0.3 percent of units shipped since 2015.